A bolt on Cupholder for up to 66mm cans, bottles or cups.
Fits: Volvo 960 outher right ventilation holePotentially also Volvo 760 with 960 type dashboard, if those are the same.
Do the research before buying to that modell prior to purchase.
Ps: yes angle is off here on the pictures as this is fited on my volvo 242 with 960 dash. Angle will be corrected when your unit comes.
Watch video here: 
https://youtu.be/zZqO_mkZyno?si=4F3Xu8CM_iq5NRoa
 
Require at least 136mm depth from front of OEM grills into the dash for installation. If less than that: you will need to modify inside of your dash ventilation ducting or other parts. Please check before purchase, and if any concern, please do contact me in advance.
Price is for One cupholder that replaces the ventilation grill.
Location: Center ventilation vents.Installation: you pull out your ventilation grill in the center of your dashboard. Then move over the retaining clips that holds the oem grill in place and push this one in, easy as that. 2 min job.
Tip: get a metall angle thingy to pull out the oem ventilation grill easy.
 
Function:
Push pull mechanism that expands out.Normal mechanism is that it dont springs out all the way nessesairy, as that would put a lot of stress on recieving parts of the modell.Spring holds it locked until pushed again.Disclaimer, needed in this society we live in:Not a toy or fidget, but yes you will most likely be playing around with the push pull function.Not a jumping board to slam your drink or cup into, with excessive force, or test how much you can pry it down until it brakes. Those are not warrantied.Yes, spare parts will be accessible for moving components on inquiry if you should be unlycky :) 
3D printed in ASA with HDT: 92°C.